Insulated Metal Panels

Insulated metal panels are among the most sophisticated and energy-efficient products on the market today. Not only are they attractive in appearance while offering a variety of finishes, but they are easy to install as well.

Mesa Wall Panel

The Mesa wall panel is the perfect choice for economy and performance. A fluted profile makes it ideal for both exterior and interior wall and ceiling applications in various markets, including industrial and commercial. Available in sizes ranging from 3″ to 6″ thick.

  • Panel thickness: 3”, 4”, 5” and 6”
  • Insulating values (R):** 24, 32, 41 and 49
  • Panel width: 40”
  • Panel length: 8’ minimum to 50’ maximum based on a 48’ flatbed trailer length (consult your sales representative for other available lengths)
  • Insulation material: CFC-free, foamed-in-place polyisocyanurate foam (2.1 to 2.5 PCF density)
  • Joint configuration: Monolithic single tongue-and-groove design
  • Metal facings: 26-gauge galvanized steel (22-gauge and 24-gauge galvanized steel also available; 26-gauge stainless steel available for interior use)
  • Coatings: Imperial White polyester (plastisol available)
  • Accessories: Fasteners, clips, sealants and brake-formed flashings

Hard Wall 40 (HW 40) Panel

Hard wall 40 (HW 40) panels are ideal for interior high-traffic wall areas such as loading docks, large warehouses and storage rooms. The hard wall component is the Oriented Strand Board (OSB) inserted behind the exposed steel facing, which provides substantial strength to resist damage caused by impact. Available in 4″ thickness in the Mesa profile.

  • Panel thickness: 4”
  • Insulating values (R):** 30
  • Panel width: 40”
  • Panel length: 8’ minimum to 30’ maximum
  • Insulation material: CFC-free, foamed-in-place polyisocyanurate foam (2.1 to 2.5 PCF density)
  • Joint configuration: Double offset tongue-and-groove design with concealed fastener
  • Profile availability: Mesa
  • Metal facings: 26-gauge galvanized steel
  • Coatings: Imperial White polyester
  • Accessories: Fasteners, concealed fastener clips, sealants, brake-formed flashings

Flat Wall 40 (FW 40) Panel

Flat wall 40 (FW 40) insulated wall panels are produced with a standard embossed face and offer a perfect solution for designers seeking a high-end architectural look—along with all the thermal benefits that insulated wall panels offer. This product offers a sleek contemporary style. Available in 2″, 2 1/2″ and 3″ thicknesses.

  • Panel thickness: 2”, 2 1/2” and 3”
  • Insulating values (R):** 16, 20 and 24
  • Standard panel width: 40” (36” available)
  • Panel length: 8’ minimum to 32’ standard maximum
  • Insulation material: CFC-free, foamed-in-place polyisocyanurate foam (2.1 to 2.5 PCF density)
  • Joint configuration: Offset tongue-and-groove design with concealed fastener
  • Metal facings: 22 gauge (exterior) and 26 gauge (interior)
  • Coatings: PVDF and SMP (other coatings available)
  • Accessories: Fasteners, concealed fastener clips, sealants, brake-formed flashings
  • Available in 1-hour fire-rated panel: FL40-F (4.5 R-32)

Striated 40 (ST 40) Panel

The striated 40 (ST 40) insulated wall panel is an extremely economical exterior or interior solution in applications where a flat, clean appearance is desired. The nominal embossed striations add rigidity and ensure an acceptable flatness tolerance. Available in 2″, 2 1/2″, 3″ and 4″ thicknesses.

  • Panel thickness: 2”, 2 1/2”, 3” and 4”
  • Insulating values (R):** 16, 20, 24 and 32
  • Standard panel width: 40” (36” available)
  • Panel length: 8’ minimum to 40’ maximum
  • Insulation material: CFC-free, foamed-in-place polyisocyanurate foam (2.1 to 2.5 PCF density)
  • Joint configuration: Offset tongue-and-groove design with concealed fastener
  • Metal facings: 26-gauge galvanized steel (22 gauge and 24 gauge also available)
  • Coatings: PVDF and SMP (other coatings available)
  • Accessories: Fasteners, concealed fastener clips, sealants, brake-formed flashings
  • Available in 1-hour fire-rated panel: ST40-F (4.5” R-32)

Standing Seam Roof (SSR) Panel

The standing seam roof (SSR) is the ultimate choice for an insulated metal roof panel. It offers the look of a traditional SSR plus the benefits and performance of an insulated metal panel. Noteworthy features include high R-values, energy efficiency and outstanding fire ratings. Available in 2”, 2 1/2”, 3” and 4” thicknesses.

  • Panel thickness: 2”, 2 1/2”, 3” and 4”
  • Insulating values (R):** 16, 20, 24 and 32
  • Standard panel width: 40” (36” available)
  • Panel length: 8’ minimum to 40’ maximum
  • Insulation material: CFC-free, foamed-in-place polyisocyanurate foam (2.1 to 2.5 PCF density)
  • Joint configuration: Offset tongue-and-groove design with concealed fastener
  • Metal facings: 26-gauge galvanized steel (22 gauge and 24 gauge also available)
  • Coatings: PVDF and SMP (other coatings available)
  • Accessories: Fasteners, concealed fastener clips, sealants, brake-formed flashings
  • Available in 1-hour fire-rated panel: ST40-F (4.5” R-32)

**R-value tested in accordance with ASTM C518/C1363 at 40°F mean temperature, adjusted for a windspeed of 15 mph.